Leader in wholesale and retail of hand car wash equipment and products
Hand Car Wash There are 516 products.
Subcategories
EQUIPMENT
Everything for the hand car wash.
Lances, hydro-guns, electric pumps, nebulizers, brushes, dosing pumps, spiral hoses, pressure regulators and fittings.
CLOTHS
CLEANING FIRST OF ALL!
Micro-fiber cloths for indoors and outdoors, glasses and dashboards. Synthetic suede leathers, moistened cloths for DIY.
SPONGES AND GLOVES
Recommend the best for car care.
Sponges, gloves and rotating horsehair brushes for car washing and polishing.
PAPER AND SKINS
We recommend only the best for drying and cleaning the car.
Ball valve in steel from FF3 / 8 "500 bar
Steel ball valveChrome-plated locking sphere on Teflon seals
15,63 € +IVAPVC lance cp 600 without nozzle with red...
Lance Nebulizer with Non-Losing Blue Lever, PVC Pipe Length 600 mmBody and seat held in polypropylene reinforced with glass fiberStainless steel pinSeal made with tempered stainless steel ballSeals in VITON
25,20 € +IVASteel ball valve from FF1 / 4 "500 bar
Valve with steel ballChrome-plated locking sphere on Teflon seals
30,00 € +IVAPump Lang Elados-Emp 1.482.13 4.8 L. 4 BAR
The ELADOS® EMP II dosing pump series is based on the block principle. The devices of this series include the drive unit, the gear, the dosing pump head and the electronics. Different electronic control variants ensure that the pump can be adapted to any processing sequence for quantitative or proportional measurement.
630,00 € +IVARigid arm L1200mm 3 / 8M output
Rigid rotating armMaterial stainless steel (AISI 304)Stainless steel tubeConnections: G ¼ F input - G 3/8 M outputLength 1200 - 47 "Ceiling connectionWeight 11.5 kg
563,00 € +IVAWall attachment suction arm L 1600
Rotating arm for aspirators / blowers. It allows the hoses to be kept clean and raised off the ground, making the car's intake easier and more hygienic.
590,10 € +IVAExtension for swivel arm
Extension for single ceiling armsWall attackSteel Cover (AISI 304)Rubber hose type R1 CompactUniversal plate
1 610,00 € +IVAAdhesive heater resistance 25x18 cm 220V...
XMAT heating elements are made by interposing a resistive circuit (resistance) between the layers of Polyester. Consequently, elements with thin and particularly flexible thicknesses suitable and suitable for heating any type of flat or curved surface are obtained. Possibility of integrating sensors or thermostats.
46,50 € +IVAAdhesive heater resistance 15x8 cm 220V...
XMAT heating elements are made by interposing a resistive circuit (resistance) between the layers of Polyester. Consequently, elements with thin and particularly flexible thicknesses suitable and suitable for heating any type of flat or curved surface are obtained. Possibility to integrate sensors or thermostats.
25,00 € +IVARigid arm L1750 mm with internal flexible...
Rigid rotating armMaterial stainless steel (AISI 304)Compact R1 rubber hoseConnections: G ¼ F input - G 3/8 M outputLength 1750 - 69 "Ceiling connectionWeight 12.5 kg
565,00 € +IVAHawk NMT pump right 1220 SCWR for Car Wash...
The NMT-CW series pumps can work at a maximum pressure of 200 bar and a water temperature up to 65° (149 F). This model is perfectly suited to be mounted on self-service car wash systems, but also on professional high pressure washers that want to offer greater durability performance, thanks to the special gaskets and the nickel-plated head.
550,00 € +IVASynthetic Cloth Roll for RDC and RD Skin...
Mtm Hydro Professional Synthetic Cloth. 275 tears for DRC and 200 tears for RD SKIN. Use Car Wash.
148,00 € +IVASynthetic / natural mixed bristle brush 6...
Car Wash FB05 fixed brush with mixed bristlesNatural-Synthetic bristlesAdmissible pressure 0.5 MPa 72.5 psiNominal flow 60 l / min 16 U.S. gal / minNominal temperature 60 ° C 140 ° F
33,00 € +IVAHawk NMT pump right 1220 CWR for Car Wash...
The NMT-CW series pumps can work at a maximum pressure of 200 bar and a water temperature up to 65° (149 F). This model is perfectly suited to be mounted on self-service car wash systems, but also on professional high pressure washers that want to offer greater durability performance, thanks to the special gaskets and the nickel-plated head.
550,00 € +IVAHawk NMT pump right 1520 CWR for Car Wash...
The NMT-CW series pumps can work at a maximum pressure of 200 bar and a water temperature up to 65 ° (149 F). This model is perfectly suited to be mounted on self-service car wash systems, but also on professional high pressure washers that want to offer more durability
600,00 € +IVAElectric motor IEC 100 1450 rpm 4Kw 5Hp...
Three-phase electric motor with shaft d. 28 for high pressure pumps
540,00 € +IVANMT 2120 21 lt pump 200 bar Right CW 1450
The NMT-CW series pumps can work at a maximum pressure of 200 bar and a water temperature up to 65 ° (149 F). This model is perfectly suited to be mounted on self-service car wash systems, but also on professional high pressure washers that want to offer greater durability performance, thanks to the special gaskets and the nickel-plated head.
530,00 € +IVAElectric motor IEC 132 1450 rpm 7,5Kw 50...
Electric motor IEC 132 1450 rpm 7,5Kw 50 hz hollow shaft diameter 24
1 350,00 € +IVALance Mosmatic Brush with Injector
Brush lance with rigid plastic handle. Length 1000 mm
150,00 € +IVA
Hand Car Wash
Top sellers
-
Token Zama Cecc 2 + 2 diam 24 (neutral)
The grooved tokens (coins with grooves) have been designed for...
0,36 € -
Black d.38 PVC nozzle
Terminal nozzle for fixed and wheeled aspiratorsFor tube diameter 38 mm
1,55 € -
Black swivel hose / nozzle fitting x tube 38/38
Swivel connection for connection between 38 mm diameter tube and suction...
6,72 € -
